Siglent

Compatible with Siglent SPD3303X, SPD3303X-E, SPD3303C Series DC Power Supplies. Holds one power supply instrument. 4U Height, compatible with 19″ racks.

The STB-3 was designed as a teaching / training aid used to demonstrate how to trigger and display complex signals on a modern oscilloscope. Signals include various sine and square waves, AM, burst, and common serial bus signals. Power is supplied by a standard USB cable.

Mixed Signal hardware option for the four-channel SDS1000X-E、SDS2000X-E、SDS800X HD and SDS1000X HD oscilloscope series. NOTE: The oscilloscope will require MSO activation license software (Part number SDS1000X-E-16LA or SDS2000X-E-16LA). Also, Four-channel SDS1000X-E scopes require firmware version 6.1.20 or greater The kit includes: Qty 1 SBus Controller Qty 1 SBus cable Qty 1 SPL1016 Wiring Harness Qty 20 SPL-C1 digital clips

Digital Oscilloscope 100 MHz Bandwidth 4 Channels 200Mpts sample rate Includes SDS2XP-BND: SPL2016, SDS2000XP-16LA, SDS2000XP-FG，SDS2000XP-FlexRay/1553B/CANFD/I2S/SENT/Manch The SDS2000X Plus series of Digital Storage Oscilloscopes by SIGLENT are offered in bandwidths of 350 MHz, 200 MHz, and 100 MHz, boasting a remarkable maximum sample rate of 2 GSa/s, and a generous maximum record length of 200 Mpts per channel, supporting up to 4 analog channels alongside 16 digital channels for mixed-signal analysis. Leveraging SIGLENT's SPO technology, the SDS2000X Plus series achieves a maximum waveform capture rate of up to 120,000 wfm/s in normal mode and an impressive 500,000 wfm/s in Sequence mode. It incorporates a 256-level intensity grading display function and a color temperature display mode for enhanced visualization. The digital trigger system, characterized by high sensitivity and low jitter, supports various triggering modes, including serial bus triggering. Advanced features like History waveform recording, Sequence acquisition, and Search and Navigate functions enable the capture, storage, and analysis of extended waveform records. The SDS2000X Plus series offers a comprehensive set of measurement and mathematical capabilities, with options for a 50 MHz waveform generator, serial decoding, mask test, bode plot, and power analysis. A notable 10-bit acquisition mode caters to applications demanding resolutions beyond the standard 8 bits. Featuring a large 10.1'' capacitive touch screen that supports multi-touch gestures, the SDS2000X Plus enhances user interaction. The oscilloscopes also facilitate remote web control, mouse, and external keyboard support, significantly improving operational efficiency. Models in the SDS2000X Plus series include SDS2354X Plus, SDS2204X Plus, SDS2104X Plus, and SDS2102X Plus. Key Features of the SDS2000X Plus series: Bandwidth options of 350 MHz, 200 MHz, 100 MHz, with a real-time sample rate up to 2 GSa/s. A 500 MHz bandwidth upgrade option is available for 350 MHz models. SPO technology with waveform capture rates up to 120,000 wfm/s (normal mode) and 500,000 wfm/s (sequence mode). 256-level intensity grading and color temperature display modes. Record length up to 200 Mpts/ch, totaling 400 Mpts for all 4 channels. Intelligent trigger system supporting Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, and Video (HDTV supported). Serial bus triggering and decoding for I2C, SPI, UART, CAN, LIN (standard), and optional protocols including CAN FD, FlexRay, I2S, MIL-STD1553B, SENT, and Manchester. Low background noise with voltage scales from 0.5 mV/div to 10 V/div. 10-bit mode for higher resolution and lower noise. Segmented acquisition (Sequence) mode for dividing the maximum record length into multiple segments (up to 90,000) with minimal dead time between segments. History waveform record (History) function for up to 90,000 triggered waveforms (frames). Automatic measurements on 50+ parameters, supporting statistics with histogram, track, trend, Gating measurement, and measurements on Math, History, and Ref. Two Math traces, supporting 2 Mpts FFT, +, -, x, ÷, d/dt, ∫dt, √, average, ERES, and formula editor. Abundant data processing and analysis functions, including Search, Navigate, Mask Test, Bode plot, Power Analysis (optional), and Counter. Optional 16 digital channels and a built-in 50 MHz DDS waveform generator. Large 10.1'' TFT-LCD display with 1024x600 resolution; Capacitive touch screen with multi-touch support. Multiple interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11/Telnet/Socket), Pass/Fail, Trigger Out. Built-in web server supporting remote control via the LAN port using a web browser; Supports SCPI remote control commands. SDS2XP-BND SIGLENT Performance Oscilloscopes all offer Logic Analysis, Waveform Generation and serial protocol decoding capabilities. For a limited time, with the purchase of a new SIGLENT Performance Oscilloscope, purchase an Analysis Bundle at a special price. The bundle includes the SPL2016 logic probe, Logic Analysis Option, Waveform Generator option, and waveform generator hardware if needed for your scope. Save $2,925.45 with this bundle!

Digital Oscilloscope 200 MHz Bandwidth 4 Channels 200Mpts sample rate Includes SDS2XP-BND: SPL2016, SDS2000XP-16LA, SDS2000XP-FG，SDS2000XP-FlexRay/1553B/CANFD/I2S/SENT/Manch The SDS2000X Plus series of Digital Storage Oscilloscopes by SIGLENT are offered in bandwidths of 350 MHz, 200 MHz, and 100 MHz, boasting a remarkable maximum sample rate of 2 GSa/s, and a generous maximum record length of 200 Mpts per channel, supporting up to 4 analog channels alongside 16 digital channels for mixed-signal analysis. Leveraging SIGLENT's SPO technology, the SDS2000X Plus series achieves a maximum waveform capture rate of up to 120,000 wfm/s in normal mode and an impressive 500,000 wfm/s in Sequence mode. It incorporates a 256-level intensity grading display function and a color temperature display mode for enhanced visualization. The digital trigger system, characterized by high sensitivity and low jitter, supports various triggering modes, including serial bus triggering. Advanced features like History waveform recording, Sequence acquisition, and Search and Navigate functions enable the capture, storage, and analysis of extended waveform records. The SDS2000X Plus series offers a comprehensive set of measurement and mathematical capabilities, with options for a 50 MHz waveform generator, serial decoding, mask test, bode plot, and power analysis. A notable 10-bit acquisition mode caters to applications demanding resolutions beyond the standard 8 bits. Featuring a large 10.1'' capacitive touch screen that supports multi-touch gestures, the SDS2000X Plus enhances user interaction. The oscilloscopes also facilitate remote web control, mouse, and external keyboard support, significantly improving operational efficiency. Models in the SDS2000X Plus series include SDS2354X Plus, SDS2204X Plus, SDS2104X Plus, and SDS2102X Plus. Key Features of the SDS2000X Plus series: Bandwidth options of 350 MHz, 200 MHz, 100 MHz, with a real-time sample rate up to 2 GSa/s. A 500 MHz bandwidth upgrade option is available for 350 MHz models. SPO technology with waveform capture rates up to 120,000 wfm/s (normal mode) and 500,000 wfm/s (sequence mode). 256-level intensity grading and color temperature display modes. Record length up to 200 Mpts/ch, totaling 400 Mpts for all 4 channels. Intelligent trigger system supporting Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, and Video (HDTV supported). Serial bus triggering and decoding for I2C, SPI, UART, CAN, LIN (standard), and optional protocols including CAN FD, FlexRay, I2S, MIL-STD1553B, SENT, and Manchester. Low background noise with voltage scales from 0.5 mV/div to 10 V/div. 10-bit mode for higher resolution and lower noise. Segmented acquisition (Sequence) mode for dividing the maximum record length into multiple segments (up to 90,000) with minimal dead time between segments. History waveform record (History) function for up to 90,000 triggered waveforms (frames). Automatic measurements on 50+ parameters, supporting statistics with histogram, track, trend, Gating measurement, and measurements on Math, History, and Ref. Two Math traces, supporting 2 Mpts FFT, +, -, x, ÷, d/dt, ∫dt, √, average, ERES, and formula editor. Abundant data processing and analysis functions, including Search, Navigate, Mask Test, Bode plot, Power Analysis (optional), and Counter. Optional 16 digital channels and a built-in 50 MHz DDS waveform generator. Large 10.1'' TFT-LCD display with 1024x600 resolution; Capacitive touch screen with multi-touch support. Multiple interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11/Telnet/Socket), Pass/Fail, Trigger Out. Built-in web server supporting remote control via the LAN port using a web browser; Supports SCPI remote control commands. SDS2XP-BND SIGLENT Performance Oscilloscopes all offer Logic Analysis, Waveform Generation and serial protocol decoding capabilities. For a limited time, with the purchase of a new SIGLENT Performance Oscilloscope, purchase an Analysis Bundle at a special price. The bundle includes the SPL2016 logic probe, Logic Analysis Option, Waveform Generator option, and waveform generator hardware if needed for your scope. Save $2,925.45 with this bundle!

Digital Oscilloscope 350 MHz Bandwidth 4 Channels 200Mpts sample rate Includes SDS2XP-BND: SPL2016, SDS2000XP-16LA, SDS2000XP-FG，SDS2000XP-FlexRay/1553B/CANFD/I2S/SENT/Manch The SDS2000X Plus series of Digital Storage Oscilloscopes by SIGLENT are offered in bandwidths of 350 MHz, 200 MHz, and 100 MHz, boasting a remarkable maximum sample rate of 2 GSa/s, and a generous maximum record length of 200 Mpts per channel, supporting up to 4 analog channels alongside 16 digital channels for mixed-signal analysis. Leveraging SIGLENT's SPO technology, the SDS2000X Plus series achieves a maximum waveform capture rate of up to 120,000 wfm/s in normal mode and an impressive 500,000 wfm/s in Sequence mode. It incorporates a 256-level intensity grading display function and a color temperature display mode for enhanced visualization. The digital trigger system, characterized by high sensitivity and low jitter, supports various triggering modes, including serial bus triggering. Advanced features like History waveform recording, Sequence acquisition, and Search and Navigate functions enable the capture, storage, and analysis of extended waveform records. The SDS2000X Plus series offers a comprehensive set of measurement and mathematical capabilities, with options for a 50 MHz waveform generator, serial decoding, mask test, bode plot, and power analysis. A notable 10-bit acquisition mode caters to applications demanding resolutions beyond the standard 8 bits. Featuring a large 10.1'' capacitive touch screen that supports multi-touch gestures, the SDS2000X Plus enhances user interaction. The oscilloscopes also facilitate remote web control, mouse, and external keyboard support, significantly improving operational efficiency. Models in the SDS2000X Plus series include SDS2354X Plus, SDS2204X Plus, SDS2104X Plus, and SDS2102X Plus. Key Features of the SDS2000X Plus series: Bandwidth options of 350 MHz, 200 MHz, 100 MHz, with a real-time sample rate up to 2 GSa/s. A 500 MHz bandwidth upgrade option is available for 350 MHz models. SPO technology with waveform capture rates up to 120,000 wfm/s (normal mode) and 500,000 wfm/s (sequence mode). 256-level intensity grading and color temperature display modes. Record length up to 200 Mpts/ch, totaling 400 Mpts for all 4 channels. Intelligent trigger system supporting Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, and Video (HDTV supported). Serial bus triggering and decoding for I2C, SPI, UART, CAN, LIN (standard), and optional protocols including CAN FD, FlexRay, I2S, MIL-STD1553B, SENT, and Manchester. Low background noise with voltage scales from 0.5 mV/div to 10 V/div. 10-bit mode for higher resolution and lower noise. Segmented acquisition (Sequence) mode for dividing the maximum record length into multiple segments (up to 90,000) with minimal dead time between segments. History waveform record (History) function for up to 90,000 triggered waveforms (frames). Automatic measurements on 50+ parameters, supporting statistics with histogram, track, trend, Gating measurement, and measurements on Math, History, and Ref. Two Math traces, supporting 2 Mpts FFT, +, -, x, ÷, d/dt, ∫dt, √, average, ERES, and formula editor. Abundant data processing and analysis functions, including Search, Navigate, Mask Test, Bode plot, Power Analysis (optional), and Counter. Optional 16 digital channels and a built-in 50 MHz DDS waveform generator. Large 10.1'' TFT-LCD display with 1024x600 resolution; Capacitive touch screen with multi-touch support. Multiple interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11/Telnet/Socket), Pass/Fail, Trigger Out. Built-in web server supporting remote control via the LAN port using a web browser; Supports SCPI remote control commands. SDS2XP-BND SIGLENT Performance Oscilloscopes all offer Logic Analysis, Waveform Generation and serial protocol decoding capabilities. For a limited time, with the purchase of a new SIGLENT Performance Oscilloscope, purchase an Analysis Bundle at a special price. The bundle includes the SPL2016 logic probe, Logic Analysis Option, Waveform Generator option, and waveform generator hardware if needed for your scope. Save $2,925.45 with this bundle!

Digital Oscilloscope 350 MHz Bandwidth 4 Channels 12 Bit 2GSa/s sample rate Available with SDS2XHD-Bundle Here SDS2XHD-Bundle includes: SPL2016, SDS2000HD-16LA, SDS2000HD-FG, SDS2000HD I2S/1553B/FlexRay/CANFD/SENT/Manch The SDS2000X HD series of high-resolution digital storage oscilloscopes from SIGLENT are equipped with advanced features, including 2 GSa/s, 12-bit Analog-Digital Converters, and front ends that deliver exceptional noise floor performance. These oscilloscopes are offered in bandwidths of 350 MHz, 200 MHz, and 100 MHz, featuring a maximum record length of 200 Mpts/ch and supporting the display of 4 analog channels along with 16 digital channels for mixed-signal analysis. Utilizing Siglent's SPO technology, the SDS2000X HD series achieves a maximum waveform capture rate of up to 100,000 wfm/s in normal mode and an impressive 500,000 wfm/s in Sequence mode. It incorporates a 256-level intensity grading display function and a color temperature display mode for enhanced visualization. The oscilloscopes employ an innovative digital trigger system characterized by high sensitivity and low jitter. This trigger system supports various powerful triggering modes, including serial bus triggering. Additional tools, such as History waveform recording, Search and Navigate functions, Mask Test, Bode Plot, Power Analysis, and Histogram, facilitate the capture, storage, and analysis of extended waveform records. The SDS2000X HD series is equipped with an array of measurement and mathematical capabilities. It also offers options for a 25 MHz arbitrary waveform generator and supports serial decoding. The user interface is designed for efficiency, with a large 10.1" capacitive touch screen that supports multi-touch gestures. The user-friendly UI design enhances operational efficiency, and the oscilloscopes support mouse control and remote web control over LAN.

Digital Oscilloscope 350 MHz Bandwidth 4 Channels 12 Bit 2GSa/s sample rate Includes SDS2XHD-Bundle: SPL2016, SDS2000HD-16LA, SDS2000HD-FG, SDS2000HD I2S/1553B/FlexRay/CANFD/SENT/Manch The SDS2000X HD series of high-resolution digital storage oscilloscopes from SIGLENT are equipped with advanced features, including 2 GSa/s, 12-bit Analog-Digital Converters, and front ends that deliver exceptional noise floor performance. These oscilloscopes are offered in bandwidths of 350 MHz, 200 MHz, and 100 MHz, featuring a maximum record length of 200 Mpts/ch and supporting the display of 4 analog channels along with 16 digital channels for mixed-signal analysis. Utilizing Siglent's SPO technology, the SDS2000X HD series achieves a maximum waveform capture rate of up to 100,000 wfm/s in normal mode and an impressive 500,000 wfm/s in Sequence mode. It incorporates a 256-level intensity grading display function and a color temperature display mode for enhanced visualization. The oscilloscopes employ an innovative digital trigger system characterized by high sensitivity and low jitter. This trigger system supports various powerful triggering modes, including serial bus triggering. Additional tools, such as History waveform recording, Search and Navigate functions, Mask Test, Bode Plot, Power Analysis, and Histogram, facilitate the capture, storage, and analysis of extended waveform records. The SDS2000X HD series is equipped with an array of measurement and mathematical capabilities. It also offers options for a 25 MHz arbitrary waveform generator and supports serial decoding. The user interface is designed for efficiency, with a large 10.1" capacitive touch screen that supports multi-touch gestures. The user-friendly UI design enhances operational efficiency, and the oscilloscopes support mouse control and remote web control over LAN. SDS2XHD-BND SIGLENT Performance Oscilloscopes all offer Logic Analysis, Waveform Generation and serial protocol decoding capabilities. For a limited time, with the purchase of a new SIGLENT Performance Oscilloscope, purchase an Analysis Bundle at a special price. The bundle includes the SPL2016 logic probe, Logic Analysis Option, Waveform Generator option, and waveform generator hardware if needed for your scope. Save $3,214.35 with this bundle!

100 MHz; 2 channels, 1 GSa/s 12 Mpts points memory depth 1 Mpts FFT 6000 counts DMM Includes Recorder mode, including Sample and Measurement Loggers

Digital Oscilloscope, 350 MHz; 2 Channels; 2 GSa/s; 28 M memory depth; 400,000 wfm/s waveform capture rate; 7'' display (800*480 pixels); SPO technology,1 Mpts FFT, Serial bus triggering and decode (Standard), supports IIC, SPI, UART, RS232, CAN, and LIN

Arbitrary Waveform Generator 1GHz, 5 GSa/s Sampling Rate; 14-bit Vertical Resolution; Arb-Waveform Length: 64 pts ~ 512 Mpts; 5 Inch Touch Screen

4 Channels, Programmable, Linear DC Power Supply 32V/3.2A, 240W

4 Channels, Programmable, Linear DC Power Supply 12V/10A, 285W

4 Channels, Programmable, Linear DC Power Supply 30V/6A, 400W

Vector Network Analyzer Frequency Range: 100kHz - 13.5GHz Frequency Resolution: 1Hz Ports: 2 Level Resolution: 0.05dB Dynamic Range: 135dB Setting range of output level: -55dbM ~ +10dBm 12.1" touch screen display Get (1) FREE Analysis option license when you register your product with Siglent. Promotion valid from 2024-11-1 to 2025-04-30. Click here for more information. The SIGLENT SNA6000A series of Vector Network Analyzers offer a frequency range of 100 kHz to 13.5 GHz and 100 kHz to 26.5 GHz, supporting 2/4-port scattering parameter, differential-parameter, and time-domain parameter measurements. These VNAs are highly effective for analyzing the Q-factor, bandwidth, and insertion loss of filters. They come equipped with features such as impedance conversion, measurement plane movement, limit testing, ripple test, fixture simulation, and adapter removal/insertion adjustments. The SNA6000A series also provides five sweep modes: Linear-Frequency, Log-Frequency, Power-Sweep, CW-Time, and Segment-Sweep. Additionally, they support scattering-parameter corrections including SOLT, SOLR, TRL, Response, and Enhanced Response, offering increased flexibility for R&D and manufacturing applications. Compared to the earlier SNA5000A model, the SNA6000A offers a notable improvement in dynamic range, enhanced front-end configurability with adjustable jumpers, and a new X86 hardware architecture with a large 12.1-inch display. When used alongside the SIGLENT SSG6000A 40 GHz Generator and the Switch Matrix Port Extension, the company’s RF lineup delivers impressive performance and application support at a highly competitive value.

Vector Network Analyzer Frequency Range: 100kHz - 13.5GHz Frequency Resolution: 1Hz Ports: 4 Level Resolution: 0.05dB Dynamic Range: 135dB Setting range of output level: -55dbM ~ +10dBm 12.1" touch screen display Get (1) FREE Analysis option license when you register your product with Siglent. Promotion valid from 2024-11-1 to 2025-04-30. Click here for more information. The SIGLENT SNA6000A series of Vector Network Analyzers offer a frequency range of 100 kHz to 13.5 GHz and 100 kHz to 26.5 GHz, supporting 2/4-port scattering parameter, differential-parameter, and time-domain parameter measurements. These VNAs are highly effective for analyzing the Q-factor, bandwidth, and insertion loss of filters. They come equipped with features such as impedance conversion, measurement plane movement, limit testing, ripple test, fixture simulation, and adapter removal/insertion adjustments. The SNA6000A series also provides five sweep modes: Linear-Frequency, Log-Frequency, Power-Sweep, CW-Time, and Segment-Sweep. Additionally, they support scattering-parameter corrections including SOLT, SOLR, TRL, Response, and Enhanced Response, offering increased flexibility for R&D and manufacturing applications. Compared to the earlier SNA5000A model, the SNA6000A offers a notable improvement in dynamic range, enhanced front-end configurability with adjustable jumpers, and a new X86 hardware architecture with a large 12.1-inch display. When used alongside the SIGLENT SSG6000A 40 GHz Generator and the Switch Matrix Port Extension, the company’s RF lineup delivers impressive performance and application support at a highly competitive value.

Vector Network Analyzer Frequency Range: 100kHz - 13.5GHz Frequency Resolution: 1Hz Ports: 4 Level Resolution: 0.05dB Dynamic Range: 135dB Setting range of output level: -55dbM ~ +10dBm 12.1" touch screen display Includes front panel jumper interface Get (1) FREE Analysis option license when you register your product with Siglent. Promotion valid from 2024-11-1 to 2025-04-30. Click here for more information. The SIGLENT SNA6000A series of Vector Network Analyzers offer a frequency range of 100 kHz to 13.5 GHz and 100 kHz to 26.5 GHz, supporting 2/4-port scattering parameter, differential-parameter, and time-domain parameter measurements. These VNAs are highly effective for analyzing the Q-factor, bandwidth, and insertion loss of filters. They come equipped with features such as impedance conversion, measurement plane movement, limit testing, ripple test, fixture simulation, and adapter removal/insertion adjustments. The SNA6000A series also provides five sweep modes: Linear-Frequency, Log-Frequency, Power-Sweep, CW-Time, and Segment-Sweep. Additionally, they support scattering-parameter corrections including SOLT, SOLR, TRL, Response, and Enhanced Response, offering increased flexibility for R&D and manufacturing applications. Compared to the earlier SNA5000A model, the SNA6000A offers a notable improvement in dynamic range, enhanced front-end configurability with adjustable jumpers, and a new X86 hardware architecture with a large 12.1-inch display. When used alongside the SIGLENT SSG6000A 40 GHz Generator and the Switch Matrix Port Extension, the company’s RF lineup delivers impressive performance and application support at a highly competitive value.

Vector Network Analyzer Frequency Range: 100kHz - 13.5GHz Frequency Resolution: 1Hz Ports: 2 Level Resolution: 0.05dB Dynamic Range: 135dB Setting range of output level: -55dbM ~ +10dBm 12.1" touch screen display Includes front panel jumper interface Get (1) FREE Analysis option license when you register your product with Siglent. Promotion valid from 2024-11-1 to 2025-04-30. Click here for more information. The SIGLENT SNA6000A series of Vector Network Analyzers offer a frequency range of 100 kHz to 13.5 GHz and 100 kHz to 26.5 GHz, supporting 2/4-port scattering parameter, differential-parameter, and time-domain parameter measurements. These VNAs are highly effective for analyzing the Q-factor, bandwidth, and insertion loss of filters. They come equipped with features such as impedance conversion, measurement plane movement, limit testing, ripple test, fixture simulation, and adapter removal/insertion adjustments. The SNA6000A series also provides five sweep modes: Linear-Frequency, Log-Frequency, Power-Sweep, CW-Time, and Segment-Sweep. Additionally, they support scattering-parameter corrections including SOLT, SOLR, TRL, Response, and Enhanced Response, offering increased flexibility for R&D and manufacturing applications. Compared to the earlier SNA5000A model, the SNA6000A offers a notable improvement in dynamic range, enhanced front-end configurability with adjustable jumpers, and a new X86 hardware architecture with a large 12.1-inch display. When used alongside the SIGLENT SSG6000A 40 GHz Generator and the Switch Matrix Port Extension, the company’s RF lineup delivers impressive performance and application support at a highly competitive value.

Vector Network Analyzer Frequency Range: 100kHz - 26.5GHz Frequency Resolution: 1Hz Ports: 2 Level Resolution: 0.05dB Dynamic Range: 135dB Setting range of output level: -55dbM ~ +10dBm 12.1" touch screen display Includes front panel jumper interface Get (1) FREE Analysis option license when you register your product with Siglent. Promotion valid from 2024-11-1 to 2025-04-30. Click here for more information. The SIGLENT SNA6000A series of Vector Network Analyzers offer a frequency range of 100 kHz to 13.5 GHz and 100 kHz to 26.5 GHz, supporting 2/4-port scattering parameter, differential-parameter, and time-domain parameter measurements. These VNAs are highly effective for analyzing the Q-factor, bandwidth, and insertion loss of filters. They come equipped with features such as impedance conversion, measurement plane movement, limit testing, ripple test, fixture simulation, and adapter removal/insertion adjustments. The SNA6000A series also provides five sweep modes: Linear-Frequency, Log-Frequency, Power-Sweep, CW-Time, and Segment-Sweep. Additionally, they support scattering-parameter corrections including SOLT, SOLR, TRL, Response, and Enhanced Response, offering increased flexibility for R&D and manufacturing applications. Compared to the earlier SNA5000A model, the SNA6000A offers a notable improvement in dynamic range, enhanced front-end configurability with adjustable jumpers, and a new X86 hardware architecture with a large 12.1-inch display. When used alongside the SIGLENT SSG6000A 40 GHz Generator and the Switch Matrix Port Extension, the company’s RF lineup delivers impressive performance and application support at a highly competitive value.

Vector Network Analyzer Frequency Range: 100kHz - 26.5GHz Frequency Resolution: 1Hz Ports: 4 Level Resolution: 0.05dB Dynamic Range: 135dB Setting range of output level: -55dbM ~ +10dBm 12.1" touch screen display Includes front panel jumper interface Get (1) FREE Analysis option license when you register your product with Siglent. Promotion valid from 2024-11-1 to 2025-04-30. Click here for more information. The SIGLENT SNA6000A series of Vector Network Analyzers offer a frequency range of 100 kHz to 13.5 GHz and 100 kHz to 26.5 GHz, supporting 2/4-port scattering parameter, differential-parameter, and time-domain parameter measurements. These VNAs are highly effective for analyzing the Q-factor, bandwidth, and insertion loss of filters. They come equipped with features such as impedance conversion, measurement plane movement, limit testing, ripple test, fixture simulation, and adapter removal/insertion adjustments. The SNA6000A series also provides five sweep modes: Linear-Frequency, Log-Frequency, Power-Sweep, CW-Time, and Segment-Sweep. Additionally, they support scattering-parameter corrections including SOLT, SOLR, TRL, Response, and Enhanced Response, offering increased flexibility for R&D and manufacturing applications. Compared to the earlier SNA5000A model, the SNA6000A offers a notable improvement in dynamic range, enhanced front-end configurability with adjustable jumpers, and a new X86 hardware architecture with a large 12.1-inch display. When used alongside the SIGLENT SSG6000A 40 GHz Generator and the Switch Matrix Port Extension, the company’s RF lineup delivers impressive performance and application support at a highly competitive value.

Vector Network Analyzer Frequency Range: 100kHz - 26.5GHz Frequency Resolution: 1Hz Ports: 4 Level Resolution: 0.05dB Dynamic Range: 135dB Setting range of output level: -55dbM ~ +10dBm 12.1" touch screen display Get (1) FREE Analysis option license when you register your product with Siglent. Promotion valid from 2024-11-1 to 2025-04-30. Click here for more information. The SIGLENT SNA6000A series of Vector Network Analyzers offer a frequency range of 100 kHz to 13.5 GHz and 100 kHz to 26.5 GHz, supporting 2/4-port scattering parameter, differential-parameter, and time-domain parameter measurements. These VNAs are highly effective for analyzing the Q-factor, bandwidth, and insertion loss of filters. They come equipped with features such as impedance conversion, measurement plane movement, limit testing, ripple test, fixture simulation, and adapter removal/insertion adjustments. The SNA6000A series also provides five sweep modes: Linear-Frequency, Log-Frequency, Power-Sweep, CW-Time, and Segment-Sweep. Additionally, they support scattering-parameter corrections including SOLT, SOLR, TRL, Response, and Enhanced Response, offering increased flexibility for R&D and manufacturing applications. Compared to the earlier SNA5000A model, the SNA6000A offers a notable improvement in dynamic range, enhanced front-end configurability with adjustable jumpers, and a new X86 hardware architecture with a large 12.1-inch display. When used alongside the SIGLENT SSG6000A 40 GHz Generator and the Switch Matrix Port Extension, the company’s RF lineup delivers impressive performance and application support at a highly competitive value.

Vector Network Analyzer Frequency Range: 100kHz - 26.5GHz Frequency Resolution: 1Hz Ports: 2 Level Resolution: 0.05dB Dynamic Range: 135dB Setting range of output level: -55dbM ~ +10dBm 12.1" touch screen display Get (1) FREE Analysis option license when you register your product with Siglent. Promotion valid from 2024-11-1 to 2025-04-30. Click here for more information. The SIGLENT SNA6000A series of Vector Network Analyzers offer a frequency range of 100 kHz to 13.5 GHz and 100 kHz to 26.5 GHz, supporting 2/4-port scattering parameter, differential-parameter, and time-domain parameter measurements. These VNAs are highly effective for analyzing the Q-factor, bandwidth, and insertion loss of filters. They come equipped with features such as impedance conversion, measurement plane movement, limit testing, ripple test, fixture simulation, and adapter removal/insertion adjustments. The SNA6000A series also provides five sweep modes: Linear-Frequency, Log-Frequency, Power-Sweep, CW-Time, and Segment-Sweep. Additionally, they support scattering-parameter corrections including SOLT, SOLR, TRL, Response, and Enhanced Response, offering increased flexibility for R&D and manufacturing applications. Compared to the earlier SNA5000A model, the SNA6000A offers a notable improvement in dynamic range, enhanced front-end configurability with adjustable jumpers, and a new X86 hardware architecture with a large 12.1-inch display. When used alongside the SIGLENT SSG6000A 40 GHz Generator and the Switch Matrix Port Extension, the company’s RF lineup delivers impressive performance and application support at a highly competitive value.

Digital Oscilloscope 4 GHz Bandwidth 4 Analog Channels 16 Digital Channels Optional (Requires SPL2016 and SDS7000A-16LA) 12 Bit Vertical Resolution 20 GSa/s sample rate 500 Mpts Memory Depth 1,000,000 wfm/s waveform capture rate Get a FREE SDS7000-PA option license when you register your product with Siglent. Promotion valid from 2024-11-1 to 2025-04-30. To qualify for the free license, register your new equipment with Siglent at the link. Register Here Siglent’s SDS7000A series of Digital Storage Oscilloscopes is offered in 4 GHz and 3 GHz bandwidth options, featuring 12-bit ADCs with a sample rate of up to 20 GSa/s. These oscilloscopes boast a maximum record length of 1 Gpts/ch and can display up to 4 analog channels along with 16 digital channels, enabling high-performance mixed-signal analysis. Utilizing Siglent’s SPO technology, the SDS7000A series achieves a maximum waveform capture rate of up to 1,000,000 wfm/s. It incorporates a 256-level intensity grading display function and a color temperature display mode. The oscilloscope is equipped with an innovative digital trigger system characterized by high sensitivity and low jitter, supporting various powerful triggering modes, including serial bus triggering. Additional features include tools such as History waveform recording, Search and Navigate functions, Signal Scan, Mask Test, Bode Plot, Power Analysis, Eye/Jitter Analysis, and Compliance Test. These tools facilitate the capture, storage, and analysis of extended waveform records. The SDS7000A series also offers an impressive range of measurement and mathematical capabilities, options for a 50 MHz arbitrary waveform generator, and support for serial decoding. The oscilloscope features a large 15.6-inch HD display with a capacitive touch screen that supports multi-touch gestures. The user-friendly UI design enhances operational efficiency, and the display also supports mouse control. Moreover, the SDS7000A series allows for remote web control over LAN, providing added convenience and flexibility in operation.