Yokogawa

Fully functional demo unit. Only available to Canadian customers. Frequency bandwidth: DC to 50 MHz Maximum continuous input range: 30 Arms Functions with Digital Oscilloscopes, Scopecorders or other waveform measuring instruments.

Fully functional demo unit Only available to Canadian customers. Precision AC Standard Intuitive operation: Dials and switches are provided for each digit and function, and traditional 7-segment LEDs provide clear visibility 6 voltage ranges (100 m/1/10/100/300/1000 V) 4 current ranges (100 m/1/10/50 A) Sweep (Voltage/Current/Frequency) Output Divider: Linearity tests can be simply performed by dividing the output into steps. For example, a setting of 4 will generate steps of 25, 50, 75 and 100% of the set output value. % Deviation readout Common current output terminals: The same output terminals are used for all current ranges. Test times are therefore reduced by avoiding the need to change the wiring for meters which have different ranges. Wide frequency range-: 40 to 1000 Hz (Frequency accuracy : ±50 ppm) The 2558A precision DC calibrator is an easy-to-use, yet highly accurate instrument that can be used to calibrate analog power meters, thermometers, and temperature controllers that use a thermocouple or a resistance temperature detector (RTD). The 2558A can output a wide range of AC voltages (1.00 mV to 1200.0 V) and currents (1.00 mA to 60.00 A) at frequencies of 40 to 1000 Hz. The accuracy (maximum error) is ±0.04% for AC voltage and ±0.05% for AC current, ensuring accurate calibration, and the stability is as high as ±0.005%/h. The easy-to-read digital display and dials for setting each digit are intuitive to use. The current output terminals can be used for all measurement ranges, which improves work efficiency by eliminating the need to change cables for a specific current level.

Fully functional demo unit Only available to Canadian customers. SMARTDAC+ 10 Channel Paperless Data Acquisition Unit GP20 - 12.1" touchscreen display /1E1D - Standard (Max Measurement Channels 100 ch), English, 100/240 VAC, UL/CSA Power Cord /MT - Mathematical function /MC - Communication channel function /UH - USB interface /UC10 - With analog input module, 10ch (Clamp terminal) /E2 - WT Communication Industrial processes and test laboratories require rigorous, continuous monitoring in the design, validation, and service stages of product development, product testing, and manufacturing. The GP series is Yokogawa’s latest laboratory recorder, with handle and footstands to enable portable and benchtop use. The GP series is an industry-first multi-point touch panel, to improve intuitive and smart operator control. Users can scroll, pan, zoom historical data, and even write freehand messages on its dust-proof and water-proof display. It delivers industry leading reliability and measurement accuracy. The GP series is ideally suited for monitoring or troubleshooting long term physical or electrical trends. More Information

Fully functional demo unit. Only available to Canadian customers. Leakage current measurement with current range from 20mA to 200A Light weight and compact design Manual range switching and auto power-off functions 24mm in diameter of measurable conductor Mean value display Auto power-off Manual range switching Approved for conformity to safety standards EN61010-1, EN61010-2-032(CAT. III 300 V)

Fully functional demo unit. Only available to Canadian customers. Voltage Calibrator - Current Calibrator Signal source: DCV (Max. 30V), DCA (Max. 24 mA) Measurement: DCV (Max. 30V), DCA (Max. 100 mA) Features: Auto step (4 to 20mA), 20mA SINK, Sweep function

Fully functional demo unit. Only available to Canadian customers. A power supply for current probes, FET probes, and differential probes. Supplies power for up to four probes, including large current probes. (For 702915 and 702916, up to two probes can be powered when measuring maximum current.)

Fully functional demo unit. Only available to Canadian customers. The Yokogawa 720220 -Channel Voltage Input Module, used in the DL850 ScopeCorder, is a multichannel voltage module capable of measuring 16 channels of DC voltage on a single unit. Scan method measurements are possible by using a removable spring terminal block (removable in 8 channel sections) at the input. The input section uses Weidmueller B2L 3.5/16LH clamp connectors. The maximum sampling rates are 200 kS/s (1 CH) and 10 kS/s (16 CH simultaneous). The minimum voltage input range is 200 mV/div, and the maximum is 42 V (direct input, 1 kHz or less).You can build a 128 CH measuring system by installing up to 8 modules in a single DL850. On each of the 16 channels (and subchannels) in the Yokogawa 720220, you can individually set the range and other input conditions, position, zoom, and other display conditions. Input terminal blocks are isolated from ground. There is no isolation between channels within the input terminal block. Specifications of the Yokogawa 720220 include: Input Channels: 16 Input Coupling: DC, GND (Selectable for each sub-CH) Maximum Sample Rate: 200kS/s (single CH) [10kS/s when using 16-CH] Input Type: Isolated unbalanced Frequency Range: (-3dB)*1 DC to 5kHz Voltage-Axis Sensitivity Setting: 200mV/div (1-2-5 steps) Maximum Input Voltage: (1kHz or less) Direct Input - 42V (DC+ACpeak) Maximum Allowable Common Mode Voltage: (1kHz or less) Direct Input 42V (DC+ACpeak) (CAT 1 and CAT II, 30 Vrms) Vertical (voltage) Axis Accuracy: DC Accuracy ±(0.3% of 10div) Input Connector: Spring-type terminal (removable per 8CH) Input Impedance 1MO ±1% Common Mode Rejection: Ratio 86 dB (50/60 Hz) or more (Typ.) A/D Conversion Resolution: 16-bit (2400 LSB/div) Temperature Coefficient: Zero point: ±(0.015% of 10div)/°C (Typ.) Gain: ±(0.01% of 10div)/°C (Typ.) Bandwidth Limit: OFF/500Hz (Selectable for each sub-CH)