Siglent

Digital Oscilloscope 70 MHz Bandwidth 4 Channels 12 Bit 2GSa/s sample rate The SDS800X HD series of high-resolution digital storage oscilloscopes from SIGLENT utilize 2 GSa/s, 12-bit Analog-Digital Converters, and front ends known for their exceptional noise floor performance. These oscilloscopes are offered in bandwidths of 200 MHz, 100 MHz, and 70 MHz, featuring a maximum record length of 100 Mpts. They provide the capability to display 2/4 analog channels alongside 16 digital channels for mixed signal analysis. Incorporating Siglent’s SPO technology, the SDS800X HD series boasts a maximum waveform capture rate of up to 120,000 wfm/s in normal mode (up to 500,000 wfm/s in Sequence mode). The oscilloscopes also feature a 256-level intensity grading display function and a color temperature display mode. An innovative digital trigger system with high sensitivity and low jitter is employed, supporting various powerful triggering modes, including serial bus triggering. These oscilloscopes come equipped with tools such as History waveform recording, Search and Navigate functions, Mask Test, Bode Plot, and Power Analysis, enabling the capture, storage, and analysis of extended waveform records. Additionally, the SDS800X HD series offers an extensive range of measurement and mathematical capabilities, options for a 25 MHz arbitrary waveform generator, and support for serial decoding. The 7″ display capacitive touch screen supports multi-touch gestures and features a user-friendly UI design to enhance operational efficiency. The oscilloscopes also support mouse control and allow for remote web control over LAN.

Digital Oscilloscope 100 MHz Bandwidth 4 Channels 12 Bit 2GSa/s sample rate The SDS800X HD series of high-resolution digital storage oscilloscopes from SIGLENT utilize 2 GSa/s, 12-bit Analog-Digital Converters, and front ends known for their exceptional noise floor performance. These oscilloscopes are offered in bandwidths of 200 MHz, 100 MHz, and 70 MHz, featuring a maximum record length of 100 Mpts. They provide the capability to display 2/4 analog channels alongside 16 digital channels for mixed signal analysis. Incorporating Siglent’s SPO technology, the SDS800X HD series boasts a maximum waveform capture rate of up to 120,000 wfm/s in normal mode (up to 500,000 wfm/s in Sequence mode). The oscilloscopes also feature a 256-level intensity grading display function and a color temperature display mode. An innovative digital trigger system with high sensitivity and low jitter is employed, supporting various powerful triggering modes, including serial bus triggering. These oscilloscopes come equipped with tools such as History waveform recording, Search and Navigate functions, Mask Test, Bode Plot, and Power Analysis, enabling the capture, storage, and analysis of extended waveform records. Additionally, the SDS800X HD series offers an extensive range of measurement and mathematical capabilities, options for a 25 MHz arbitrary waveform generator, and support for serial decoding. The 7″ display capacitive touch screen supports multi-touch gestures and features a user-friendly UI design to enhance operational efficiency. The oscilloscopes also support mouse control and allow for remote web control over LAN.

Digital Oscilloscope 200 MHz Bandwidth 2 Channels 12 Bit 2GSa/s sample rate The SDS800X HD series of high-resolution digital storage oscilloscopes from SIGLENT utilize 2 GSa/s, 12-bit Analog-Digital Converters, and front ends known for their exceptional noise floor performance. These oscilloscopes are offered in bandwidths of 200 MHz, 100 MHz, and 70 MHz, featuring a maximum record length of 100 Mpts. They provide the capability to display 2/4 analog channels alongside 16 digital channels for mixed signal analysis. Incorporating Siglent’s SPO technology, the SDS800X HD series boasts a maximum waveform capture rate of up to 120,000 wfm/s in normal mode (up to 500,000 wfm/s in Sequence mode). The oscilloscopes also feature a 256-level intensity grading display function and a color temperature display mode. An innovative digital trigger system with high sensitivity and low jitter is employed, supporting various powerful triggering modes, including serial bus triggering. These oscilloscopes come equipped with tools such as History waveform recording, Search and Navigate functions, Mask Test, Bode Plot, and Power Analysis, enabling the capture, storage, and analysis of extended waveform records. Additionally, the SDS800X HD series offers an extensive range of measurement and mathematical capabilities, options for a 25 MHz arbitrary waveform generator, and support for serial decoding. The 7″ display capacitive touch screen supports multi-touch gestures and features a user-friendly UI design to enhance operational efficiency. The oscilloscopes also support mouse control and allow for remote web control over LAN.

Digital Oscilloscope 200 MHz Bandwidth 4 Channels 12 Bit 2GSa/s sample rate The SDS800X HD series of high-resolution digital storage oscilloscopes from SIGLENT utilize 2 GSa/s, 12-bit Analog-Digital Converters, and front ends known for their exceptional noise floor performance. These oscilloscopes are offered in bandwidths of 200 MHz, 100 MHz, and 70 MHz, featuring a maximum record length of 100 Mpts. They provide the capability to display 2/4 analog channels alongside 16 digital channels for mixed signal analysis. Incorporating Siglent’s SPO technology, the SDS800X HD series boasts a maximum waveform capture rate of up to 120,000 wfm/s in normal mode (up to 500,000 wfm/s in Sequence mode). The oscilloscopes also feature a 256-level intensity grading display function and a color temperature display mode. An innovative digital trigger system with high sensitivity and low jitter is employed, supporting various powerful triggering modes, including serial bus triggering. These oscilloscopes come equipped with tools such as History waveform recording, Search and Navigate functions, Mask Test, Bode Plot, and Power Analysis, enabling the capture, storage, and analysis of extended waveform records. Additionally, the SDS800X HD series offers an extensive range of measurement and mathematical capabilities, options for a 25 MHz arbitrary waveform generator, and support for serial decoding. The 7″ display capacitive touch screen supports multi-touch gestures and features a user-friendly UI design to enhance operational efficiency. The oscilloscopes also support mouse control and allow for remote web control over LAN.

Digital Oscilloscope 100 MHz Bandwidth 2 Channels 12 Bit 2GSa/s sample rate 100 Mpts memory depth 10.1" touchscreen SIGLENT’s SDS1000X HD series of high-resolution digital storage oscilloscopes utilize 2 GSa/s, 12-bit Analog-Digital Converters, and front ends known for their exceptional noise floor performance. These oscilloscopes are offered in bandwidths of 200 MHz and 100 MHz, featuring a maximum record length of 100 Mpts and the ability to display 2/4 analog channels alongside 16 digital channels for mixed signal analysis. The SDS1000X HD series incorporates Siglent’s SPO technology, boasting a maximum waveform capture rate of up to 120,000 wfm/s in normal mode (up to 500,000 wfm/s in Sequence mode). These oscilloscopes also feature a 256-level intensity grading display function and a color temperature display mode. An innovative digital trigger system with high sensitivity and low jitter is employed, supporting various powerful triggering modes, including serial bus triggering. Equipped with tools such as History waveform recording, Search and Navigate functions, Mask Test, Bode Plot, and Power Analysis, the SDS1000X HD series allows for the capture, storage, and analysis of extended waveform records. Additionally, these oscilloscopes offer an impressive array of measurement and mathematical capabilities, options for a 25 MHz arbitrary waveform generator, and support for serial decoding. The large 10.1″ capacitive touch screen display supports multi-touch gestures and features a user-friendly UI design, significantly enhancing operational efficiency. Furthermore, it supports mouse control and allows for remote web control over LAN.

Digital Oscilloscope 100 MHz Bandwidth 4 Channels 12 Bit 2GSa/s sample rate 100 Mpts memory depth 10.1" touchscreen SIGLENT’s SDS1000X HD series of high-resolution digital storage oscilloscopes utilize 2 GSa/s, 12-bit Analog-Digital Converters, and front ends known for their exceptional noise floor performance. These oscilloscopes are offered in bandwidths of 200 MHz and 100 MHz, featuring a maximum record length of 100 Mpts and the ability to display 2/4 analog channels alongside 16 digital channels for mixed signal analysis. The SDS1000X HD series incorporates Siglent’s SPO technology, boasting a maximum waveform capture rate of up to 120,000 wfm/s in normal mode (up to 500,000 wfm/s in Sequence mode). These oscilloscopes also feature a 256-level intensity grading display function and a color temperature display mode. An innovative digital trigger system with high sensitivity and low jitter is employed, supporting various powerful triggering modes, including serial bus triggering. Equipped with tools such as History waveform recording, Search and Navigate functions, Mask Test, Bode Plot, and Power Analysis, the SDS1000X HD series allows for the capture, storage, and analysis of extended waveform records. Additionally, these oscilloscopes offer an impressive array of measurement and mathematical capabilities, options for a 25 MHz arbitrary waveform generator, and support for serial decoding. The large 10.1″ capacitive touch screen display supports multi-touch gestures and features a user-friendly UI design, significantly enhancing operational efficiency. Furthermore, it supports mouse control and allows for remote web control over LAN.

Digital Oscilloscope 200 MHz Bandwidth 4 Channels 12 Bit 2GSa/s sample rate 100 Mpts memory depth 10.1" touchscreen SIGLENT's SDS1000X HD series of high-resolution digital storage oscilloscopes utilize 2 GSa/s, 12-bit Analog-Digital Converters, and front ends known for their exceptional noise floor performance. These oscilloscopes are offered in bandwidths of 200 MHz and 100 MHz, featuring a maximum record length of 100 Mpts and the ability to display 2/4 analog channels alongside 16 digital channels for mixed signal analysis. The SDS1000X HD series incorporates Siglent's SPO technology, boasting a maximum waveform capture rate of up to 120,000 wfm/s in normal mode (up to 500,000 wfm/s in Sequence mode). These oscilloscopes also feature a 256-level intensity grading display function and a color temperature display mode. An innovative digital trigger system with high sensitivity and low jitter is employed, supporting various powerful triggering modes, including serial bus triggering. Equipped with tools such as History waveform recording, Search and Navigate functions, Mask Test, Bode Plot, and Power Analysis, the SDS1000X HD series allows for the capture, storage, and analysis of extended waveform records. Additionally, these oscilloscopes offer an impressive array of measurement and mathematical capabilities, options for a 25 MHz arbitrary waveform generator, and support for serial decoding. The large 10.1" capacitive touch screen display supports multi-touch gestures and features a user-friendly UI design, significantly enhancing operational efficiency. Furthermore, it supports mouse control and allows for remote web control over LAN.

Digital Oscilloscope 350 MHz Bandwidth 4 Channels 12 Bit 4GSa/s sample rate 400 Mpts memory depth 10.1" touchscreen Get a FREE SDS3000HD-PA option license when you register your product with Siglent. Promotion valid from 2024-11-1 to 2025-04-30. To qualify for the free license, register your new equipment with Siglent at the link. Register Here SIGLENT's SDS3000X HD series of Digital Storage Oscilloscopes are offered in bandwidths of 1 GHz, 500 MHz, and 350 MHz. These oscilloscopes feature 12-bit ADCs with a sample rate of up to 4GSa/s, a maximum record length of 400 Mpts/ch, and the ability to display up to 4 analog channels alongside 16 digital channels for advanced mixed signal analysis. The SDS3000X HD series utilizes Siglent's SPO technology, offering a maximum waveform capture rate of up to 200,000 wfm/s, a 256-level intensity grading display function, and a color temperature display mode. It incorporates an innovative digital trigger system with high sensitivity and low jitter, supporting various powerful triggering modes, including serial bus triggering. Equipped with tools such as History waveform recording, Search and Navigate functions, Mask Test, Bode Plot, and Power Analysis, the SDS3000X HD series enables the capture, storage, and analysis of extended waveform records. Additionally, these oscilloscopes provide a comprehensive range of measurement and mathematical capabilities, options for a 50 MHz arbitrary waveform generator, and support for serial decoding. The generous 10.1" capacitive touch screen display supports multi-touch gestures and features a user-friendly UI design, significantly enhancing operational efficiency. Furthermore, it supports mouse control and allows for remote web control over LAN.

Handheld Oscilloscope 200MHz Bandwidth 2 Channels 500MS/s sample rate The handheld digital oscilloscopes offered by SIGLENT include the SHS800X and SHS1000X models. These devices feature two analog oscilloscope input channels and are available in 200 MHz and 100 MHz analog bandwidths. They are equipped with a single ADC, providing a maximum sample rate of 1 GSa/s, and a single memory module with a depth of 12 Mpts. When both channels are enabled, each channel operates at a sample rate of 500 MSa/s with a standard record length of 6 Mpts. In the case of a single activated channel, the maximum sample rate becomes 1 GSa/s, and the maximum record length increases to 12 Mpts. The user-friendly front panel design facilitates easy access to frequently used functions. The SHS800X series features two non-isolated scope channels and one isolated multimeter channel. On the other hand, the SHS1000X series provides full isolation between the two oscilloscope channels, one multimeter channel, power adapter, and the USB host/device port. This full isolation makes it suitable for both laboratory and floating signal measurements, minimizing the risk of accidental short circuits. The maximum voltage input for the analog scope inputs is CATIII 600 Vrms, CATII 1000 Vrms. The multimeter has a maximum input of CATIII 600 Vrms, CATII 1000 Vrms. Utilizing Super-Phosphor Oscilloscope (SPO) technology, the SHS series ensures excellent signal fidelity and performance. It offers a vertical input range from 2 mV/div to 100 V/div and a maximum offset range of up to 400 V. The digital trigger system delivers high sensitivity and low jitter, with a waveform capture rate of up to 400,000 frames/sec. Additional features include a 256-level intensity grading display function, a color temperature display mode, and various triggering modes such as serial bus triggering for IIC, SPI, UART, CAN, LIN bus types. The SHS series also incorporates history waveform recording, sequential triggering, and a new 1 million point FFT math function for high-frequency resolution in signal spectra observation. The built-in sample and measurement value recorders offer flexible recording options, supporting up to 25 hours of continuous recording. Featuring a 6000-count digital multimeter, isolated from the scope, the SHS series can measure DC/AC Voltage, DC/AC Current, Resistance, Capacitance, Diodes, and Continuity. A rechargeable 6900 mAh lithium battery provides up to 5.5 hours (4 hours for SHS1000X) of operation without charging. The handheld oscilloscopes are housed in a sealed IP51 dust and drip-proof casing, ensuring ruggedness for harsh environments. The design includes large rubberized keys for easy use in challenging conditions. Key Features of the SHS820X/SHS1202X and SHS810X/SHS1102X models include: 200 MHz, 100 MHz bandwidth models Sample rate of 1 GSa/s (single-channel), Sample rate of 500 MSa/s (two-channels) Siglent SPO technology Waveform capture rates up to 100,000 wfm/s (normal mode) and 400,000 wfm/s (sequence mode) 256-level intensity grading and color temperature display modes Record length up to 12 Mpts Digital trigger system with various trigger modes Serial bus triggering and decoding for IIC, SPI, UART, CAN, and LIN protocols Video trigger/HDTV Low background noise with voltage scales from 2 mV/div to 100 V/div One-button shortcuts for Oscilloscope, Multimeter, and Recorder functions Eight one-button shortcuts for various functions Segmented acquisition (Sequence) mode for capturing qualifying events History waveform record (History) function Automatic measurement function for 38 parameters, Measurement Statistics, Zoom, Gating, Math, History, and Reference functions 1 Mpts FFT with support for Peaks and Markers Customizable default key settings Multi-language display and embedded online help Security Erase mode Search and navigate function Recorder mode with Sample and Measurement Loggers 6000 counts Digital Multimeter supporting various measurements 5.6-inch TFT-LCD display with 640 * 480 resolution Isolated USB Host, USB Device (MicroUSB -TMC) interfaces Supports SCPI remote control commands UL2054 certified lithium battery pack with 6900 mAh capacity and external charger IP Rating: IP51 Compliance with UL61010-1, UL61010-2-030, UL61010-2-033

Handheld Oscilloscope 100MHz Bandwidth 2 Isolated Channels 1GSa/s sample rate The handheld digital oscilloscopes offered by SIGLENT include the SHS800X and SHS1000X models. These devices feature two analog oscilloscope input channels and are available in 200 MHz and 100 MHz analog bandwidths. They are equipped with a single ADC, providing a maximum sample rate of 1 GSa/s, and a single memory module with a depth of 12 Mpts. When both channels are enabled, each channel operates at a sample rate of 500 MSa/s with a standard record length of 6 Mpts. In the case of a single activated channel, the maximum sample rate becomes 1 GSa/s, and the maximum record length increases to 12 Mpts. The user-friendly front panel design facilitates easy access to frequently used functions. The SHS800X series features two non-isolated scope channels and one isolated multimeter channel. On the other hand, the SHS1000X series provides full isolation between the two oscilloscope channels, one multimeter channel, power adapter, and the USB host/device port. This full isolation makes it suitable for both laboratory and floating signal measurements, minimizing the risk of accidental short circuits. The maximum voltage input for the analog scope inputs is CATIII 600 Vrms, CATII 1000 Vrms. The multimeter has a maximum input of CATIII 600 Vrms, CATII 1000 Vrms. Utilizing Super-Phosphor Oscilloscope (SPO) technology, the SHS series ensures excellent signal fidelity and performance. It offers a vertical input range from 2 mV/div to 100 V/div and a maximum offset range of up to 400 V. The digital trigger system delivers high sensitivity and low jitter, with a waveform capture rate of up to 400,000 frames/sec. Additional features include a 256-level intensity grading display function, a color temperature display mode, and various triggering modes such as serial bus triggering for IIC, SPI, UART, CAN, LIN bus types. The SHS series also incorporates history waveform recording, sequential triggering, and a new 1 million point FFT math function for high-frequency resolution in signal spectra observation. The built-in sample and measurement value recorders offer flexible recording options, supporting up to 25 hours of continuous recording. Featuring a 6000-count digital multimeter, isolated from the scope, the SHS series can measure DC/AC Voltage, DC/AC Current, Resistance, Capacitance, Diodes, and Continuity. A rechargeable 6900 mAh lithium battery provides up to 5.5 hours (4 hours for SHS1000X) of operation without charging. The handheld oscilloscopes are housed in a sealed IP51 dust and drip-proof casing, ensuring ruggedness for harsh environments. The design includes large rubberized keys for easy use in challenging conditions. Key Features of the SHS820X/SHS1202X and SHS810X/SHS1102X models include: 200 MHz, 100 MHz bandwidth models Sample rate of 1 GSa/s (single-channel), Sample rate of 500 MSa/s (two-channels) Siglent SPO technology Waveform capture rates up to 100,000 wfm/s (normal mode) and 400,000 wfm/s (sequence mode) 256-level intensity grading and color temperature display modes Record length up to 12 Mpts Digital trigger system with various trigger modes Serial bus triggering and decoding for IIC, SPI, UART, CAN, and LIN protocols Video trigger/HDTV Low background noise with voltage scales from 2 mV/div to 100 V/div One-button shortcuts for Oscilloscope, Multimeter, and Recorder functions Eight one-button shortcuts for various functions Segmented acquisition (Sequence) mode for capturing qualifying events History waveform record (History) function Automatic measurement function for 38 parameters, Measurement Statistics, Zoom, Gating, Math, History, and Reference functions 1 Mpts FFT with support for Peaks and Markers Customizable default key settings Multi-language display and embedded online help Security Erase mode Search and navigate function Recorder mode with Sample and Measurement Loggers 6000 counts Digital Multimeter supporting various measurements 5.6-inch TFT-LCD display with 640 * 480 resolution Isolated USB Host, USB Device (MicroUSB -TMC) interfaces Supports SCPI remote control commands UL2054 certified lithium battery pack with 6900 mAh capacity and external charger IP Rating: IP51 Compliance with UL61010-1, UL61010-2-030, UL61010-2-033

Digital Oscilloscope 100MHz Bandwidth 4 Channels 14Mpts Memory Depth SIGLENT offers the SDS1000X-E Super Phosphor Oscilloscopes in two-channel and four-channel models. The two-channel variant provides a 200 MHz analog bandwidth, a single ADC with a maximum sample rate of 1 GSa/s, and a single memory module with 14 Mpts of sample memory. On the other hand, the four-channel version is available in 100 MHz and 200 MHz models, featuring two 1 GSa/s ADCs and two 14 Mpts memory modules. When all channels are active, each channel operates at a sample rate of 500 MSa/s with a standard record length of 7 Mpts. In the case of a single channel per ADC being active, the maximum sample rate is 1 GSa/s, and the maximum record length is 14 Mpts. The front panel design is user-friendly, providing easy access to commonly used functions. The SDS1000X-E series incorporates Super-Phosphor Oscilloscope (SPO) technology for excellent signal fidelity and performance, with lower system noise compared to similar products. It offers a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/sec in sequence mode. Additional features include a 256-level intensity grading display function and a unique color temperature display mode. This oscilloscope series supports multiple powerful triggering modes, including serial bus triggering and decoding for IIC, SPI, UART, CAN, and LIN protocols. The XE models include History waveform recording and sequential triggering for extended waveform analysis. A notable addition is the new 1 million points FFT math function, providing high-frequency resolution when observing signal spectra. The digital design incorporates a hardware co-processor for quick and accurate measurements without compromising acquisition and front-panel response. The SDS1000X-E series stands out in its price class, offering unmatched features and performance. The four-channel series includes advanced functions such as searching and navigating, on-screen Bode plot, 16 digital channels (Option), an external USB-powered 25 MHz AWG module (Option), a USB WIFI adapter (Option), and an embedded application for remote control via a web browser. Key Features of the SDS1104X-E, SDS1204X-E, and SDS1202X-E models include: 100 MHz, 200 MHz bandwidth models Two-channel series has one 1 GSa/s ADC, four-channel series has two 1 GSa/s ADCs When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per ADC is active, it has a sample rate of 1 GSa/s Siglent SPO technology Waveform capture rates up to 100,000 wfm/s (normal mode) and 400,000 wfm/s (sequence mode) Supports 256-level intensity grading and color temperature display modes Record length up to 14 Mpts Digital trigger system with intelligent trigger modes Serial bus triggering and decoding for IIC, SPI, UART, CAN, LIN Video trigger, supports HDTV Low background noise with voltage scales from 500 μV/div to 10 V/div Ten types of one-button shortcuts for various functions Segmented acquisition (Sequence) mode for capturing qualifying events History waveform record (History) function with a maximum recorded waveform length of 80,000 frames Automatic measurement function for 38 parameters and Measurement Statistics, Zoom, Gating, Math, History, and Reference functions 1 Mpts FFT with Peaks and Markers support for four-channel series Math and measurement functions utilize all sampled data points (up to 14 Mpts) Preset key can be customized for user settings or factory defaults Security Erase mode High-speed hardware-based Pass/Fail function MSO, 16 digital channels (four-channel series only, option) Bode plot, Measuring Power Supply Control Loop Response (four-channel series only) Search and navigate (four-channel series only) USB AWG module (four-channel series only, option) USB WIFI adapter (four-channel series only, option) Web Browser-based control (four-channel series only) Large 7-inch TFT-LCD display with 800 * 480 resolution Multiple interface types: USB Host, USB Device (USB -TMC), LAN, Pass/Fail, Trigger Out Supports SCPI remote control commands VXI-11+SCPI, Telnet (Port 5024) +SCPI, and Socket (Port 5025) +SCPI programming over LAN Supports Multi-language display and embedded online help Supports Label (four-channel series only) Supports counter (four-channel series only) Supports data logger including Sample Logger and Measurement Logger (four-channel series only) Supports NTP (Network Time Protocol) (four-channel series only)

Digital Oscilloscope 200MHz Bandwidth 2 Channels 14Mpts Memory Depth SIGLENT offers the SDS1000X-E Super Phosphor Oscilloscopes in two-channel and four-channel models. The two-channel variant provides a 200 MHz analog bandwidth, a single ADC with a maximum sample rate of 1 GSa/s, and a single memory module with 14 Mpts of sample memory. On the other hand, the four-channel version is available in 100 MHz and 200 MHz models, featuring two 1 GSa/s ADCs and two 14 Mpts memory modules. When all channels are active, each channel operates at a sample rate of 500 MSa/s with a standard record length of 7 Mpts. In the case of a single channel per ADC being active, the maximum sample rate is 1 GSa/s, and the maximum record length is 14 Mpts. The front panel design is user-friendly, providing easy access to commonly used functions. The SDS1000X-E series incorporates Super-Phosphor Oscilloscope (SPO) technology for excellent signal fidelity and performance, with lower system noise compared to similar products. It offers a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/sec in sequence mode. Additional features include a 256-level intensity grading display function and a unique color temperature display mode. This oscilloscope series supports multiple powerful triggering modes, including serial bus triggering and decoding for IIC, SPI, UART, CAN, and LIN protocols. The XE models include History waveform recording and sequential triggering for extended waveform analysis. A notable addition is the new 1 million points FFT math function, providing high-frequency resolution when observing signal spectra. The digital design incorporates a hardware co-processor for quick and accurate measurements without compromising acquisition and front-panel response. The SDS1000X-E series stands out in its price class, offering unmatched features and performance. The four-channel series includes advanced functions such as searching and navigating, on-screen Bode plot, 16 digital channels (Option), an external USB-powered 25 MHz AWG module (Option), a USB WIFI adapter (Option), and an embedded application for remote control via a web browser. Key Features of the SDS1104X-E, SDS1204X-E, and SDS1202X-E models include: 100 MHz, 200 MHz bandwidth models Two-channel series has one 1 GSa/s ADC, four-channel series has two 1 GSa/s ADCs When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per ADC is active, it has a sample rate of 1 GSa/s Siglent SPO technology Waveform capture rates up to 100,000 wfm/s (normal mode) and 400,000 wfm/s (sequence mode) Supports 256-level intensity grading and color temperature display modes Record length up to 14 Mpts Digital trigger system with intelligent trigger modes Serial bus triggering and decoding for IIC, SPI, UART, CAN, LIN Video trigger, supports HDTV Low background noise with voltage scales from 500 μV/div to 10 V/div Ten types of one-button shortcuts for various functions Segmented acquisition (Sequence) mode for capturing qualifying events History waveform record (History) function with a maximum recorded waveform length of 80,000 frames Automatic measurement function for 38 parameters and Measurement Statistics, Zoom, Gating, Math, History, and Reference functions 1 Mpts FFT with Peaks and Markers support for four-channel series Math and measurement functions utilize all sampled data points (up to 14 Mpts) Preset key can be customized for user settings or factory defaults Security Erase mode High-speed hardware-based Pass/Fail function MSO, 16 digital channels (four-channel series only, option) Bode plot, Measuring Power Supply Control Loop Response (four-channel series only) Search and navigate (four-channel series only) USB AWG module (four-channel series only, option) USB WIFI adapter (four-channel series only, option) Web Browser-based control (four-channel series only) Large 7-inch TFT-LCD display with 800 * 480 resolution Multiple interface types: USB Host, USB Device (USB -TMC), LAN, Pass/Fail, Trigger Out Supports SCPI remote control commands VXI-11+SCPI, Telnet (Port 5024) +SCPI, and Socket (Port 5025) +SCPI programming over LAN Supports Multi-language display and embedded online help Supports Label (four-channel series only) Supports counter (four-channel series only) Supports data logger including Sample Logger and Measurement Logger (four-channel series only) Supports NTP (Network Time Protocol) (four-channel series only)

Digital Oscilloscope 200MHz Bandwidth 4 Channels 14Mpts Memory Depth SIGLENT offers the SDS1000X-E Super Phosphor Oscilloscopes in two-channel and four-channel models. The two-channel variant provides a 200 MHz analog bandwidth, a single ADC with a maximum sample rate of 1 GSa/s, and a single memory module with 14 Mpts of sample memory. On the other hand, the four-channel version is available in 100 MHz and 200 MHz models, featuring two 1 GSa/s ADCs and two 14 Mpts memory modules. When all channels are active, each channel operates at a sample rate of 500 MSa/s with a standard record length of 7 Mpts. In the case of a single channel per ADC being active, the maximum sample rate is 1 GSa/s, and the maximum record length is 14 Mpts. The front panel design is user-friendly, providing easy access to commonly used functions. The SDS1000X-E series incorporates Super-Phosphor Oscilloscope (SPO) technology for excellent signal fidelity and performance, with lower system noise compared to similar products. It offers a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/sec in sequence mode. Additional features include a 256-level intensity grading display function and a unique color temperature display mode. This oscilloscope series supports multiple powerful triggering modes, including serial bus triggering and decoding for IIC, SPI, UART, CAN, and LIN protocols. The XE models include History waveform recording and sequential triggering for extended waveform analysis. A notable addition is the new 1 million points FFT math function, providing high-frequency resolution when observing signal spectra. The digital design incorporates a hardware co-processor for quick and accurate measurements without compromising acquisition and front-panel response. The SDS1000X-E series stands out in its price class, offering unmatched features and performance. The four-channel series includes advanced functions such as searching and navigating, on-screen Bode plot, 16 digital channels (Option), an external USB-powered 25 MHz AWG module (Option), a USB WIFI adapter (Option), and an embedded application for remote control via a web browser. Key Features of the SDS1104X-E, SDS1204X-E, and SDS1202X-E models include: 100 MHz, 200 MHz bandwidth models Two-channel series has one 1 GSa/s ADC, four-channel series has two 1 GSa/s ADCs When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per ADC is active, it has a sample rate of 1 GSa/s Siglent SPO technology Waveform capture rates up to 100,000 wfm/s (normal mode) and 400,000 wfm/s (sequence mode) Supports 256-level intensity grading and color temperature display modes Record length up to 14 Mpts Digital trigger system with intelligent trigger modes Serial bus triggering and decoding for IIC, SPI, UART, CAN, LIN Video trigger, supports HDTV Low background noise with voltage scales from 500 μV/div to 10 V/div Ten types of one-button shortcuts for various functions Segmented acquisition (Sequence) mode for capturing qualifying events History waveform record (History) function with a maximum recorded waveform length of 80,000 frames Automatic measurement function for 38 parameters and Measurement Statistics, Zoom, Gating, Math, History, and Reference functions 1 Mpts FFT with Peaks and Markers support for four-channel series Math and measurement functions utilize all sampled data points (up to 14 Mpts) Preset key can be customized for user settings or factory defaults Security Erase mode High-speed hardware-based Pass/Fail function MSO, 16 digital channels (four-channel series only, option) Bode plot, Measuring Power Supply Control Loop Response (four-channel series only) Search and navigate (four-channel series only) USB AWG module (four-channel series only, option) USB WIFI adapter (four-channel series only, option) Web Browser-based control (four-channel series only) Large 7-inch TFT-LCD display with 800 * 480 resolution Multiple interface types: USB Host, USB Device (USB -TMC), LAN, Pass/Fail, Trigger Out Supports SCPI remote control commands VXI-11+SCPI, Telnet (Port 5024) +SCPI, and Socket (Port 5025) +SCPI programming over LAN Supports Multi-language display and embedded online help Supports Label (four-channel series only) Supports counter (four-channel series only) Supports data logger including Sample Logger and Measurement Logger (four-channel series only) Supports NTP (Network Time Protocol) (four-channel series only)

Digital Oscilloscope 100 MHz Bandwidth 4 Channels 200Mpts sample rate The SDS2000X Plus series of Digital Storage Oscilloscopes by SIGLENT are offered in bandwidths of 350 MHz, 200 MHz, and 100 MHz, boasting a remarkable maximum sample rate of 2 GSa/s, and a generous maximum record length of 200 Mpts per channel, supporting up to 4 analog channels alongside 16 digital channels for mixed-signal analysis. Leveraging SIGLENT's SPO technology, the SDS2000X Plus series achieves a maximum waveform capture rate of up to 120,000 wfm/s in normal mode and an impressive 500,000 wfm/s in Sequence mode. It incorporates a 256-level intensity grading display function and a color temperature display mode for enhanced visualization. The digital trigger system, characterized by high sensitivity and low jitter, supports various triggering modes, including serial bus triggering. Advanced features like History waveform recording, Sequence acquisition, and Search and Navigate functions enable the capture, storage, and analysis of extended waveform records. The SDS2000X Plus series offers a comprehensive set of measurement and mathematical capabilities, with options for a 50 MHz waveform generator, serial decoding, mask test, bode plot, and power analysis. A notable 10-bit acquisition mode caters to applications demanding resolutions beyond the standard 8 bits. Featuring a large 10.1'' capacitive touch screen that supports multi-touch gestures, the SDS2000X Plus enhances user interaction. The oscilloscopes also facilitate remote web control, mouse, and external keyboard support, significantly improving operational efficiency. Models in the SDS2000X Plus series include SDS2354X Plus, SDS2204X Plus, SDS2104X Plus, and SDS2102X Plus. Key Features of the SDS2000X Plus series: Bandwidth options of 350 MHz, 200 MHz, 100 MHz, with a real-time sample rate up to 2 GSa/s. A 500 MHz bandwidth upgrade option is available for 350 MHz models. SPO technology with waveform capture rates up to 120,000 wfm/s (normal mode) and 500,000 wfm/s (sequence mode). 256-level intensity grading and color temperature display modes. Record length up to 200 Mpts/ch, totaling 400 Mpts for all 4 channels. Intelligent trigger system supporting Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, and Video (HDTV supported). Serial bus triggering and decoding for I2C, SPI, UART, CAN, LIN (standard), and optional protocols including CAN FD, FlexRay, I2S, MIL-STD1553B, SENT, and Manchester. Low background noise with voltage scales from 0.5 mV/div to 10 V/div. 10-bit mode for higher resolution and lower noise. Segmented acquisition (Sequence) mode for dividing the maximum record length into multiple segments (up to 90,000) with minimal dead time between segments. History waveform record (History) function for up to 90,000 triggered waveforms (frames). Automatic measurements on 50+ parameters, supporting statistics with histogram, track, trend, Gating measurement, and measurements on Math, History, and Ref. Two Math traces, supporting 2 Mpts FFT, +, -, x, ÷, d/dt, ∫dt, √, average, ERES, and formula editor. Abundant data processing and analysis functions, including Search, Navigate, Mask Test, Bode plot, Power Analysis (optional), and Counter. Optional 16 digital channels and a built-in 50 MHz DDS waveform generator. Large 10.1'' TFT-LCD display with 1024x600 resolution; Capacitive touch screen with multi-touch support. Multiple interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11/Telnet/Socket), Pass/Fail, Trigger Out. Built-in web server supporting remote control via the LAN port using a web browser; Supports SCPI remote control commands.

Digital Oscilloscope 200 MHz Bandwidth 4 Channels 200Mpts sample rate The SDS2000X Plus series of Digital Storage Oscilloscopes by SIGLENT are offered in bandwidths of 350 MHz, 200 MHz, and 100 MHz, boasting a remarkable maximum sample rate of 2 GSa/s, and a generous maximum record length of 200 Mpts per channel, supporting up to 4 analog channels alongside 16 digital channels for mixed-signal analysis. Leveraging SIGLENT's SPO technology, the SDS2000X Plus series achieves a maximum waveform capture rate of up to 120,000 wfm/s in normal mode and an impressive 500,000 wfm/s in Sequence mode. It incorporates a 256-level intensity grading display function and a color temperature display mode for enhanced visualization. The digital trigger system, characterized by high sensitivity and low jitter, supports various triggering modes, including serial bus triggering. Advanced features like History waveform recording, Sequence acquisition, and Search and Navigate functions enable the capture, storage, and analysis of extended waveform records. The SDS2000X Plus series offers a comprehensive set of measurement and mathematical capabilities, with options for a 50 MHz waveform generator, serial decoding, mask test, bode plot, and power analysis. A notable 10-bit acquisition mode caters to applications demanding resolutions beyond the standard 8 bits. Featuring a large 10.1'' capacitive touch screen that supports multi-touch gestures, the SDS2000X Plus enhances user interaction. The oscilloscopes also facilitate remote web control, mouse, and external keyboard support, significantly improving operational efficiency. Models in the SDS2000X Plus series include SDS2354X Plus, SDS2204X Plus, SDS2104X Plus, and SDS2102X Plus. Key Features of the SDS2000X Plus series: Bandwidth options of 350 MHz, 200 MHz, 100 MHz, with a real-time sample rate up to 2 GSa/s. A 500 MHz bandwidth upgrade option is available for 350 MHz models. SPO technology with waveform capture rates up to 120,000 wfm/s (normal mode) and 500,000 wfm/s (sequence mode). 256-level intensity grading and color temperature display modes. Record length up to 200 Mpts/ch, totaling 400 Mpts for all 4 channels. Intelligent trigger system supporting Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, and Video (HDTV supported). Serial bus triggering and decoding for I2C, SPI, UART, CAN, LIN (standard), and optional protocols including CAN FD, FlexRay, I2S, MIL-STD1553B, SENT, and Manchester. Low background noise with voltage scales from 0.5 mV/div to 10 V/div. 10-bit mode for higher resolution and lower noise. Segmented acquisition (Sequence) mode for dividing the maximum record length into multiple segments (up to 90,000) with minimal dead time between segments. History waveform record (History) function for up to 90,000 triggered waveforms (frames). Automatic measurements on 50+ parameters, supporting statistics with histogram, track, trend, Gating measurement, and measurements on Math, History, and Ref. Two Math traces, supporting 2 Mpts FFT, +, -, x, ÷, d/dt, ∫dt, √, average, ERES, and formula editor. Abundant data processing and analysis functions, including Search, Navigate, Mask Test, Bode plot, Power Analysis (optional), and Counter. Optional 16 digital channels and a built-in 50 MHz DDS waveform generator. Large 10.1'' TFT-LCD display with 1024x600 resolution; Capacitive touch screen with multi-touch support. Multiple interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11/Telnet/Socket), Pass/Fail, Trigger Out. Built-in web server supporting remote control via the LAN port using a web browser; Supports SCPI remote control commands.

Digital Oscilloscope 350 MHz Bandwidth 4 Channels 200Mpts sample rate The SDS2000X Plus series of Digital Storage Oscilloscopes by SIGLENT are offered in bandwidths of 350 MHz, 200 MHz, and 100 MHz, boasting a remarkable maximum sample rate of 2 GSa/s, and a generous maximum record length of 200 Mpts per channel, supporting up to 4 analog channels alongside 16 digital channels for mixed-signal analysis. Leveraging SIGLENT's SPO technology, the SDS2000X Plus series achieves a maximum waveform capture rate of up to 120,000 wfm/s in normal mode and an impressive 500,000 wfm/s in Sequence mode. It incorporates a 256-level intensity grading display function and a color temperature display mode for enhanced visualization. The digital trigger system, characterized by high sensitivity and low jitter, supports various triggering modes, including serial bus triggering. Advanced features like History waveform recording, Sequence acquisition, and Search and Navigate functions enable the capture, storage, and analysis of extended waveform records. The SDS2000X Plus series offers a comprehensive set of measurement and mathematical capabilities, with options for a 50 MHz waveform generator, serial decoding, mask test, bode plot, and power analysis. A notable 10-bit acquisition mode caters to applications demanding resolutions beyond the standard 8 bits. Featuring a large 10.1'' capacitive touch screen that supports multi-touch gestures, the SDS2000X Plus enhances user interaction. The oscilloscopes also facilitate remote web control, mouse, and external keyboard support, significantly improving operational efficiency. Models in the SDS2000X Plus series include SDS2354X Plus, SDS2204X Plus, SDS2104X Plus, and SDS2102X Plus. Key Features of the SDS2000X Plus series: Bandwidth options of 350 MHz, 200 MHz, 100 MHz, with a real-time sample rate up to 2 GSa/s. A 500 MHz bandwidth upgrade option is available for 350 MHz models. SPO technology with waveform capture rates up to 120,000 wfm/s (normal mode) and 500,000 wfm/s (sequence mode). 256-level intensity grading and color temperature display modes. Record length up to 200 Mpts/ch, totaling 400 Mpts for all 4 channels. Intelligent trigger system supporting Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, and Video (HDTV supported). Serial bus triggering and decoding for I2C, SPI, UART, CAN, LIN (standard), and optional protocols including CAN FD, FlexRay, I2S, MIL-STD1553B, SENT, and Manchester. Low background noise with voltage scales from 0.5 mV/div to 10 V/div. 10-bit mode for higher resolution and lower noise. Segmented acquisition (Sequence) mode for dividing the maximum record length into multiple segments (up to 90,000) with minimal dead time between segments. History waveform record (History) function for up to 90,000 triggered waveforms (frames). Automatic measurements on 50+ parameters, supporting statistics with histogram, track, trend, Gating measurement, and measurements on Math, History, and Ref. Two Math traces, supporting 2 Mpts FFT, +, -, x, ÷, d/dt, ∫dt, √, average, ERES, and formula editor. Abundant data processing and analysis functions, including Search, Navigate, Mask Test, Bode plot, Power Analysis (optional), and Counter. Optional 16 digital channels and a built-in 50 MHz DDS waveform generator. Large 10.1'' TFT-LCD display with 1024x600 resolution; Capacitive touch screen with multi-touch support. Multiple interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11/Telnet/Socket), Pass/Fail, Trigger Out. Built-in web server supporting remote control via the LAN port using a web browser; Supports SCPI remote control commands.

Digital Oscilloscope 200 MHz Bandwidth 4 Channels 12 Bit 2GSa/s sample rate Available with SDS2XHD-Bundle Here SDS2XHD-Bundle includes: SPL2016, SDS2000HD-16LA, SDS2000HD-FG, SDS2000HD I2S/1553B/FlexRay/CANFD/SENT/Manch Get a FREE SDS2000HD-PA option license when you register your product with Siglent. Promotion valid from 2024-11-1 to 2025-04-30. To qualify for the free license, register your new equipment with Siglent at the link. Register Here The SDS2000X HD series of high-resolution digital storage oscilloscopes from SIGLENT are equipped with advanced features, including 2 GSa/s, 12-bit Analog-Digital Converters, and front ends that deliver exceptional noise floor performance. These oscilloscopes are offered in bandwidths of 350 MHz, 200 MHz, and 100 MHz, featuring a maximum record length of 200 Mpts/ch and supporting the display of 4 analog channels along with 16 digital channels for mixed-signal analysis. Utilizing Siglent's SPO technology, the SDS2000X HD series achieves a maximum waveform capture rate of up to 100,000 wfm/s in normal mode and an impressive 500,000 wfm/s in Sequence mode. It incorporates a 256-level intensity grading display function and a color temperature display mode for enhanced visualization. The oscilloscopes employ an innovative digital trigger system characterized by high sensitivity and low jitter. This trigger system supports various powerful triggering modes, including serial bus triggering. Additional tools, such as History waveform recording, Search and Navigate functions, Mask Test, Bode Plot, Power Analysis, and Histogram, facilitate the capture, storage, and analysis of extended waveform records. The SDS2000X HD series is equipped with an array of measurement and mathematical capabilities. It also offers options for a 25 MHz arbitrary waveform generator and supports serial decoding. The user interface is designed for efficiency, with a large 10.1" capacitive touch screen that supports multi-touch gestures. The user-friendly UI design enhances operational efficiency, and the oscilloscopes support mouse control and remote web control over LAN.

Waveform Generator 10MHz Max Output Frequency 1 Output Channel 125MSa/s Sample Rate 16Kpts Arbitrary Waveform Length The SDG800 series Function/Arbitrary Waveform Generator is a recent addition to the SIGLENT family, featuring a user-friendly design that includes a 3.5-inch TFT-LCD display. The generator comes equipped with built-in Chinese/English language options, an online help function, and supports both USB drives and internal storage for convenient file management.

Waveform Generator 30MHz Max Output Frequency 1 Output Channel 125MSa/s Sample Rate 16Kpts Arbitrary Waveform Length The SDG800 series Function/Arbitrary Waveform Generator is a recent addition to the SIGLENT family, featuring a user-friendly design that includes a 3.5-inch TFT-LCD display. The generator comes equipped with built-in Chinese/English language options, an online help function, and supports both USB drives and internal storage for convenient file management.

Waveform Generators 60MHz Max Output Frequency 2 Output Channels 150MSa/s Sample Rate 14 bit vertical resolution 16Kpts Arbitrary Waveform Length The SDG1000X by SIGLENT is a series of dual-channel function/arbitrary waveform generators featuring specifications such as a maximum bandwidth of up to 60 MHz, a sampling rate of 150 MSa/s, and a vertical resolution of 14 bits. Utilizing the proprietary EasyPulse & TrueArb technique, this series addresses the inherent weaknesses of traditional DDS generators when generating pulse and arbitrary waveforms. The dedicated square generator within the SDG1000X is capable of producing square waveforms with frequencies up to 60 MHz and low jitter. With these advantages, the SDG1000X caters to users by delivering a diverse range of high-fidelity/low-jitter signals, meeting the evolving demands of various complex applications.

Waveform Generators 40MHz Max Output Frequency 2 Output Channels 1.2GSa/s Sample Rate 16 bit vertical resolution 8Mpts Arbitrary Waveform Length The SDG2000X, developed by SIGLENT, comprises a series of dual-channel function/arbitrary waveform generators featuring specifications including a maximum bandwidth of up to 120 MHz, a sampling rate of 1.2 GSa/s, and a vertical resolution of 16 bits. Leveraging the proprietary TrueArb & EasyPulse techniques, this series effectively addresses the shortcomings inherent in traditional DDS generators when generating arbitrary, square, and pulse waveforms. With these advantages, the SDG2000X is capable of delivering a diverse range of high-fidelity and low-jitter signals, meeting the escalating demands of complex and extensive applications.

Waveform Generators 80MHz Max Output Frequency 2 Output Channels 1.2GSa/s Sample Rate 16 bit vertical resolution 8Mpts Arbitrary Waveform Length The SDG2000X, developed by SIGLENT, comprises a series of dual-channel function/arbitrary waveform generators featuring specifications including a maximum bandwidth of up to 120 MHz, a sampling rate of 1.2 GSa/s, and a vertical resolution of 16 bits. Leveraging the proprietary TrueArb & EasyPulse techniques, this series effectively addresses the shortcomings inherent in traditional DDS generators when generating arbitrary, square, and pulse waveforms. With these advantages, the SDG2000X is capable of delivering a diverse range of high-fidelity and low-jitter signals, meeting the escalating demands of complex and extensive applications.

Waveform Generators 120MHz Max Output Frequency 2 Output Channels 1.2GSa/s Sample Rate 16 bit vertical resolution 8Mpts Arbitrary Waveform Length The SDG2000X, developed by SIGLENT, comprises a series of dual-channel function/arbitrary waveform generators featuring specifications including a maximum bandwidth of up to 120 MHz, a sampling rate of 1.2 GSa/s, and a vertical resolution of 16 bits. Leveraging the proprietary TrueArb & EasyPulse techniques, this series effectively addresses the shortcomings inherent in traditional DDS generators when generating arbitrary, square, and pulse waveforms. With these advantages, the SDG2000X is capable of delivering a diverse range of high-fidelity and low-jitter signals, meeting the escalating demands of complex and extensive applications.

Waveform Generator 350MHz Max Output Frequency 2 Output Channels 2.4 GSa/s Sample Rate 16 bit vertical resolution 20Mpts Arbitrary Waveform Length The SDG6000X series by SIGLENT is a collection of dual-channel Pulse/Arbitrary Waveform Generators, offering specifications such as a maximum bandwidth of up to 500 MHz, a sample rate reaching 2.4 GSa/s, and a 16-bit vertical resolution. This series incorporates the proprietary TrueArb & EasyPulse technology, effectively addressing the limitations found in traditional DDS generators when generating arbitrary, square, and pulse waveforms. Notably, the SDG6000X serves as a versatile multi-function device capable of producing Noise, IQ signals, and PRBS patterns. These features empower the SDG6000X to deliver a diverse range of high-fidelity and low-jitter signals, effectively meeting the increasing demands of intricate and resource-intensive applications.